This is a replacement pull-ring pressure relief valve made to the Cornelius standard. Almost every ball lock keg uses this style of valve, including all new KegLand kegs. It’s an easy swap for a worn or missing valve, or for the old lever-tab style on a second-hand keg.
The yellow valve opens at around 17psi (1.2 bar). It also fits MK4 regulators and Kegmenter lids. The low opening pressure makes it a good choice for gear that shouldn’t run at full keg pressure, such as FermZilla fermenters.
Features
- Cornelius standard fitting. Suits ball lock (corny) keg lids, MK4 regulators and Kegmenter lids
- Pull ring for letting pressure out by hand
- Made to tight tolerances and batch tested for a consistent opening pressure
- Opening pressure: about 17psi / 1.2 bar
Keep it clean: Dried beer or sugar inside the valve can change the pressure it opens at. If anything gets in, clean it out straight away.
Please note: This is a safety valve, not a spunding valve. The opening pressure is approximate, within about ±10psi. To hold a set pressure while fermenting, use a BlowTie spunding valve.
Also available: Yellow 17psi, Red 35psi, Green 65psi and Grey 100psi.