3.3L Oxygen Disposable Gas Cylinder (O2)

Pure oxygen is the best way to get your yeast off to a cracking start.  Simply use this high pressure and high-capacity disposable tank to boost dissolved oxygen levels in your cooled wort.

We would recommend the use of a diffusion stone.  These small diffusion stones create very fine bubbles of oxygen in your wort and help the oxygen to dissolve into solution faster.  If you want a really nice option, we would recommend the use of this oxygenation wand.

Specifications:
396Liters (566g) Food Grade Oxygen
M12 Metric Thread (This is common for Disposable oxygen cylinders including some other brands on the market)
Working Pressure: 120Bar
Test Pressure: 180Bar
Yellow Easy Carry Handle Set Included

Package Dimensions:
390mm High x 140mm Diameter

Directions for use:
This cylinder must be used with an approved pressure regulator. BEER LUV cannot guarantee untested regulators on this cylinder will work.
We would recommend using the KL02165 KegLand M12 Inert Gas Regulator.
For homebrewing oxygenation, we would also recommend the following products:
KB02097 2 Micron Oxygenation/Aeration Wand duotight kit
KL13185 Oxygen flow meter Including duotight – 8mm (5/16) x FFL
These products will allow you to accurately oxygenate your wort prior to pitching yeast.

1. Remove the protection cap from the valve.
2. Connect the regulator to the cylinder valve. Attach the regulator to the top of your disposable cylinder.  Turn pressure up to 10-20psi.  With a sanitized oxygenation wand with 0.5 or 2 micron stone  immerse the diffusion stone in wort at the lowest possible point for 1-2 minutes.
NOTE: Wort must be cold.  It is extremely difficult to get oxygen to dissolve into hot wort so it’s essential to cool wort completely before starting this process.
There may be some gas escaping as you’re screwing on so screw the gas cylinder into the regulator quickly to limit this loss, continue to screw on until gas stops.

PLEASE NOTE: If you are removing the regulator at any point you MUST use a spanner to hold the brass neck of the cylinder. Failure to do so could cause the strong adhesive glue to crack and the cylinder detach from the fitting. 

WARNING: Contains gas under pressure, may explode if heated. Pressurised Container, ensure cylinder is empty before disposal. Do not expose to naked flame or any incandescent material. Keep out of reach of children, only use in well ventilated areas.
This product is intended for homebrewing oxygenation purposes only with oxygen safe gear.

Regulators
These particular disposable cylinders are made with a metric M12 thread so they have a different thread to conventional refillable oxygen cylinders.  To purchase the regulator for this cylinder you can click on the link below:

KL02165 – Oxygen Regulator for Disposable Cylinders

High Capacity
Unlike Bernzomatic cylinders these high capacity cylinders hold more than 10 times more gas meaning better value for you in a cylinder that is not much bigger in size.

Other Gasses
If you are looking for other gasses KegLand also sells:
KL01526 – Disposable Argon Cylinders – This are great for welding or dispensing wine.
KL25317 – 2.2L Nitrogen Cylinder – Perfect for dispensing your own stout or nitro coffee.

To avoid the chance of leaks and returning to an empty bottle, please triple check every connection point on your system or disconnect your gas cylinder between uses.