FermZilla – Flat Bottom 30L (7.9 Gal) Fermenter-including Air Lock,Tap and Sticker Thermometer

Includes 

Stick-on Thermometer Strip, Volume Graduation Sticker, 3-Piece Airlock, Easy-Grip Lid and Tap

Please note the Black Carry handle lid does not need a seal, it will seal with plastic on plastic.

SPECIAL NOTE:
This fermenter has not been pressure rated and it’s not designed to ferment under pressure, pressure transfer or carbonate in. If you are looking for a pressure rated fermenter that you can carbonate in then we would recommend that you go for the “FermZilla All-Rounder in 30L or 60L” Or “FermZilla Conical Uni Tank in 27L and 55L” models.  For this reason, we have not supplied this tank with a PRV valve and do not recommend putting it under pressure by modification.

WARNING: This fermenter is only rated to temperatures of 45C. Ensure to cool any liquid down to below this temperature before pouring in to the fermenter. If you need to dissolve extract syrup with boiling water, make sure to cover the syrup with sanitised foil or the sanitised lid of the can while cooling and cool down to below 45C in an ice bath for example.

This awesome fermenter is perfect for:

• Home Brewing and Beer Making
• Wine Making / Racking
• Kombucha Fermentation
• Spirit Wash Fermentation

Dimensions:
35 x 35 x 47cm to top of the accessory port on the lid.

5 Reasons to Get the FermZilla Flat Bottom is Superior to other HDPE and PP Fermenters
1. Super Smooth
The PET is super smooth making it easier to clean.  Other HDPE fermenters have very porous wall meaning krausen sticks to the walls and the holes in HDPE are large enough for bacteria to grow in the wall of the fermenter.
2. Better Oxygen Barrier
Some fermenters like the Coopers type are not even airtight and have a loose-fitting lid allowing oxygen to get into the fermenter easily.  Other fermenters are often made from HDPE that has high gas transmission rate meaning oxygen can pass through the wall of the fermenter
3. Lightweight and strong
The FermZilla fermenters are lightweight but really strong and shatterproof.
4. Convenient Lid Opening Size
The opening at the top is 120mm diameter so its easy to get your arm into clean but also small enough that it’s easy to seal the lid with minimal force.
5. New Lid Design
The new lid design allows you to fit other accessories to the lid easily such as thermowell or glycol coil.