No products in the cart.
DUOTIGHT – 8mm(5/16) x One Way Check Valve/Non-Return Valve
$5.00
Looking for high quaility push in fittings that will seal tight? Duotight are the push in fitting with superior sealing capacity due to the double o-ring sealing design.
Why do we use Double O-rings?
The secret to our superior sealing performance is not just the fact that we use high quality EPDM o-rings but also use two of them. The double o-ring means we literally have twice the sealing surface surface when compared with other push in fittings. This makes our fittings even more reliable and reduces the chance of a leak significantly.
The double o-ring system also means that we can bend the hose with much tighter radius without causing leaking issues. This typically can be an issue with other fittings. This combination of factors makes duotight fittings the most reliable push fit fittings on the market.
Compatible with our
– EVABarrier 4mm ID x 8mm OD line
– EVABarrier 5mm ID x 8mm OD line
Not compatible with 6mm ID x 10mm OD line
No clamps necessary!
We do recommend cutting your hosing straight, not on an angle, to ensure the line has a complete seal. To remove the fitting simply push in the collet and the hose can be removed. These push in fittings are suitable to be used up to 100 psi.
Out of stock
This very handy fitting could save you your regulator and is a good investment. This particular type of check valve has low opening pressure of only 1psi. This check valve is suitable for clean liquids such as water or for gas. The spring and internal components are made with stainless steel and quality EPDM seals.
This fitting is ideally used with EVABarrier 5mm x 8mm or EVABarrier 4mm x 8mm
No clamps necessary!
We do recommend cutting your hosing straight, not on an angle, to ensure the line has a complete seal. To remove the fitting simply push in the collet and the hose can be removed. These push in fittings are suitable to be used up to 100 psi
These push in fittings have been engineered for maximised performance in both gas and liquid applications. Compared to other push in fittings on the market, duotight takes the double safety approach to all of the connections with two EPDM o-rings per hose port. No other push ins on the market have EPDM o-rings, let alone two! per push in connection.
What is EPDM?
EPDM = Ethylene Propylene Rubber which has excellent chemical resistance including being compatible with ozone, oils, wide variety of alkaline and acid compounds, water, alcohol, ketone and beverages.
EPDM is also resistant to aging, weather and will not perish easily like other rubber compounds. When compared with silicon and vinyl EPDM has better gas transmission rates, better wear resistance, is BPA free and is the number one choice for many long lasting food grade applications.
Related products
KEGGING AND DISPENSING
$5.00
KEGGING AND DISPENSING
$5.00
KEGGING AND DISPENSING
$12.00
KEGGING AND DISPENSING
$15.00
BREWING AND FERMENTING
$115.00
CLEANING AND SANITISING
$4.50
KEGGING AND DISPENSING
$45.00
KEGGING AND DISPENSING
D-Type Coupler – Full Stainless Steel – DUOTIGHT 5/8″ to 8mm push in
$70.00