Everything you need to start pressure fermenting, in one kit, built around the latest 30L FermZilla All Rounder. The FermZilla is the best-selling PET pressure fermenter in the world.
The kit includes red gas and yellow liquid carbonation caps, plus a weighted mesh dip tube filter with a float, so you draw off the clearest possible beer right down to the last drop. The new Easy-Grip threaded lid ring makes the lid easy to tighten and undo. The reinforced hex base now comes as standard, so there’s no more fiddling with straps and tie-downs. It also includes the red BlowTie spunding valve, so you can ferment under pressure safely.
The All Rounder gives you all the benefits of an affordable pressure fermentation and transfer vessel, without the extra cleaning time of a conical FermZilla. It’s the best all-round choice for a busy brewer who still wants to make the best beer they can.
It’s an ideal starting point for new brewers getting into pressure fermenting, or for anyone who wants to transfer out under pressure to reduce oxygen pick-up. For the best results, do a closed transfer into a 19L or 9.5L stainless steel keg with a Low2 lid o-ring.
What’s in the box
- 1 x 30L All Rounder FermZilla base kit with Easy-Grip threaded lid ring (KL15189)
- 1 x FermZilla All Rounder hex base, with 24 sticky dots pre-attached (KB03937)
- 1 x red carbonation cap, gas in (KL10788)
- 1 x yellow carbonation cap, liquid out (KL10788-Yellow)
- 1 x yellow weighted stainless steel float with silicone dip tube and mesh filter (KL17060). Cut the dip tube to the depth that suits what you’re fermenting.
- 1 x integrated gauge BlowTie spunding valve kit, 0–15psi (KB03529)
Kit contents are fixed and can’t be swapped or changed.
You’ll also need
- A CO2 gas cylinder, to transfer into a keg, bottle or can, or to serve straight from the fermenter
- Disconnects and tubing for transfers. If you don’t have spares, a Big Jumper transfer line kit is an easy option.
Important
- Read the instructions thoroughly before use.
- Always keep PET fermenters out of direct sunlight. Sunlight degrades PET.
Before every use: water pressure test
Before you fill the fermenter each time, check that every connection is leak-free. Fill the FermZilla with some water, apply at least 15psi of pressure, then check for leaks around all the caps and threads. Tip it in each direction so water reaches every spot that could leak.
About small dents
Large, thin-walled blow-moulded vessels sometimes arrive with small dents or dimples from shipping. That’s normal and nothing to worry about. FermZilla fermenters are designed to flex like this, so they can cope with some suction during cold crashing and rough handling in transit without losing strength or pressure rating. Small dents will push out with use and positive pressure. A fermenter only needs replacing in the rare case that it shows white stress marks or the plastic is damaged.