BrewZilla + DigiBoil S.S Adjustable Lid Clamps – Short (4pcs/set)

Get the exact tension you need with your BrewZilla, DigiBoil or even GrainFather with KegLands Stainless Steel Adjustable Clamp Set. Adjust to your specification.

This set of 4 adjustable stainless steel clamp set suits the 35L and 65L BrewZilla Gen 3 all the way to Gen 4 as well as all 35L and 65L DigiBoils.
It also suits the 12L and 24L Boiler Extensions.

How to instructions:
1. You will need a pair of bolt cutters or tin snips to cut the current clamp off. (Please see product photos for optimum cut location)
2. Remove the nut and bolt and thread it through the clamp. Ensure that the grooved part is facing outwards (photo for reference). If you do not have the grooved part facing outwards, the clamp will found on the round lip of the boiler.
3. Loosen the bolts and spin the clamp up or down to adjust the tension. Use the nuts to lock the desired tension. It is always best to start looser than you think, then adjust tighter.

WARNING:Do not use the clamps or adjustable clamps with a glass lid, the clamps are only designed for metal steam condenser or distillation lids.

Please note: All Gen 4 35L, 65L BrewZillas will come with these in the near future as standard. Please check the body of the description/photos to confirm.
All Gen 4 100L units have a longer adjustable clamp as standard.