duotight Gen 2 – 8mm (5/16) adhesive wall clip – 2 Pack

These can swivel around if you need to mount on a particular angle once stuck down.
They can also easily be removed from the 8mm duotight side as they simply click/clamp in to eachother.

If you are to mount this inside your Kegerator / Keezer, you must do so when the unit is off / warm. It will not stick as well in a moist / cold environment. Best to give it atleast 24 hours of stick time before attaching weight / hosing to it.
Wipe down surface with isopropyl alcohol prior to sticking.

Most commonly to be used with:
KL46244 – 8mm (5/16) duotight x 6 Way Manifold with Check Valves & Isolation Valves
KL46237 – 8mm (5/16) duotight x 4 Way Manifold with Check Valves & Isolation Valves
KL46220 – 8mm (5/16) duotight x 2 Way Manifold with Check Valves & Isolation Valves
&
KL46268 – duotight – 8mm (5/16) x 5 Way Multi-Tee
If you want to know if your duotight fitting will fit this, it must be a grey duotight that has a black collet piece.

Not suitable for 8mm ball lock disconnects
Not suitable for multiple re-applications.