High Capacity: 157L
(at standard temperature and pressure)
86 grams
FOOD GRADE
Nitrogen (N2)
Specifications
Cylinder Type: 3 Piece Welded Cro-Molly Alloy
Cylinder Volume: 1.43L
Working Pressure: 110bar (1595.42psi)
Test Pressure: 180bar (2610.68psi)
Directions for use
This bottle is compatible with our KegLand M10 Inert Gas Regulator. It’s also compatible with many other regulators already on the market.
1. Remove the protection cap from the valve.
2. Connect the regulator to the cylinder valve. There may be some gas escaping as you’re screwing on so screw the gas cylinder into the regulator quickly to limit this loss, continue to screw on until gas stops.
3. Set the outlet flow/pressure on the regulator. Please note to turn off the gas you must remove the regulator from the cylinder.
PLEASE NOTE: If you are removing the regulator at any point you MUST use a spanner to hold the brass neck of the cylinder. Failure to do so could cause the strong adhesive glue to crack and the cylinder detach from the fitting.
To avoid the chance of leaks and returning to an empty bottle, please triple check every connection point on your system or disconnect your gas cylinder between uses.