Magnetic Drive Pump for BrewZilla Gen 3

This magnetic drive pump is the ideal pump is the same one that we use in the RoboBrew Gen 3 or BrewZilla Gen 3.1 to 3.1.1 in both the 35L and 65L models. Capable of withstanding temperatures up to 120°C it can handle the boil directly without the need to cool before use. Extremely efficient well under 1 amp this pump can be run continuously at elevated temperatures.

Putting pressure from restrictive flow will not hurt a magnetically driven pump, it is precisely what this baby is used for.
It is not self priming, so it will need to be lower than the vessel primed with liquid before it can push it around. It is not submersible!

The input and output of the pump are 14mm OD so this will allow you to hook up 18.5mm OD silicone hose directly to the pump and secure with 18-20mm Hose Clamp

This pump is not self priming, so it will need to be lower than the vessel primed with liquid before it can push it around. It is not submersible!

This pump also comes un-wired.  So it’s ready to install into your own brewery or replace the RoboBrew/BrewZilla pump if you need to for some reason.