A 4-way 8mm (5/16″) duotight manifold with an isolation ball valve and a built-in check valve on every outlet. The check valves stop gas flowing backwards. If your setup needs gas or water to flow freely both ways, each check valve can easily be removed.
To cap off any outlets you’re not using, we recommend the duotight 8mm (5/16″) plug (KL06958). To service or remove a ball valve, gently pop open the black retainer tabs with a thin flat-head screwdriver and slide the valve out.
It’s ready to mount straight out of the box with button-head screws. To fix it to a kegerator without drilling, use the duotight 8mm adhesive brackets.
Uses
- Gas: isolate up to 4 separate 8mm gas lines
- Inline regulators: stagger inline regulators across up to 5 different gas lines
- Not suitable for liquids other than filtered water
Compatible tubing
Optimised for 8mm OD EVABarrier double-wall line:
- KL06224 – 4mm ID x 8mm OD, 12m
- KL06231 – 5mm ID x 8mm OD, 12m
- KL42741 – 5mm ID x 8mm OD, 12m (red)
- KL42765 – 4mm ID x 8mm OD, 12m (black Lightshield)
Why duotight Generation 2?
- Double o-ring seal in two materials: an EPDM o-ring for excellent chemical and gas resistance, plus a silicone o-ring that stays flexible in sub-zero temperatures.
- Polyketone (POK) body: instead of standard acetal. It stands up to harsh brewery cleaners, won’t go brittle in UV light, and is rated to over 300psi at 25°C.
- Colour-coded collets: black means 8mm (5/16″).
- Depth indicators: >| |< markings show when the hose is fully seated.
- No clamps needed: push the hose in to seal, and push the collet to release it.
Tip: cut your tubing with a tube cutter for a straight, clean edge. An angled cut is the most common cause of leaks with push-in fittings.